Toggle sidebar

spherical smoker build

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
meatie2178

meatie2178

Newbie
Original poster
Oct 4, 2009
4
10
Good Morning!

I've found a 150 gallon (not quite 3' diameter) spherical propane tank and am considering building a firebox behind the access I'd cut into it.  Any thoughts on expected performance?  A little googling has me concerned about a too-much-direct-heat issue.  But with an offset firebox, I think it would be ok, right?

Thanks!

Mike
 
You must log in or register to reply here.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Similar threads

NefariousTrashMan
80g smoker build
Replies
4
Views
5K
Blowing Smoke Around the Smoker.
BigW.
B
M
Very Small (12.3 gallon) propane tank reverse flow
Replies
5
Views
2K
Reverse Flow
MeltedSolid
M
silv50
Help with first smoker build
Replies
1
Views
487
Smoker Builds
JBW450
J
W
Offset Firebox Question
Replies
10
Views
5K
Side Fire Box
westofsouth
W
D
Propane smoker build to sell?
Replies
2
Views
8K
Propane Smokers
Denarii Welding
D
S
Newest smoker build
Replies
6
Views
5K
Side Fire Box
realdocBBQ
realdocBBQ
B
My first backyard smoker build, 250 Gallon offset for Arizona
Replies
3
Views
6K
Smoker Builds
realdocBBQ
realdocBBQ
D
Offset airflow tuning + firebox sizing question on co-specced build
Replies
4
Views
6K
Smoker Builds
FoxmanNC
FoxmanNC

Latest posts

Hot Threads

Top Bottom
Back
Clicky