or Connect
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Charcoal Smokers › Expanded Metal?.........Do I Have Three Eyes?
New Posts  All Forums:Forum Nav:

Expanded Metal?.........Do I Have Three Eyes?

post #1 of 18
Thread Starter 
Went to my local Home Depot to purchase some expanded metal which is recommended here on the Forum to build a charcoal basket for my UDS.............Well, when I asked where I could pick up a piece the salesman looked at me as though I had three eyes...........He had no clue as to what I was asking for.

Could someone tell me what the traditional use of expanded metal is so I can go to the proper supplier and pick some up?

Thanks, John
post #2 of 18
If you are close to a recycler and steel supplier, they will have about anything you could possibly need for a smoker build, from tubing to sheet and everything in between.

If you're not near a steel supplier, then I would try to order the expanded metal from Lowe's or Home Depot. I have seen it available online, just haven't looked lately. See if they will ship it to your local outlet to save you from paying the shipping cost (shipping will be spendy).

post #3 of 18
My local Ace Hardware store carries the expanded metal... Might try them if you have one close by.
post #4 of 18
expanded metal is used for all sorts of things, I don't know if there is a traditional use of it. I would try to check a local fabricator (usaully cheaper) if there is one in the area if not go back to home depot and ask them where there steel is. They should have some type of steel be it angle iron or any flat steel and it should be in that area
post #5 of 18
Lowe's carries some. Kinda small pieces though.
post #6 of 18
isle #15 at my home depot,probly your's too.

post #7 of 18
Look in your Yellow Pages for a welding shop. They'll hook you up and can cut just the size you need.

Here is an online source. Don't know how expensive shipping would be though.


Your Home Depot experience is not uncommon. Someone here posted a similar experience awhile back. Only difference was the HD employee who apparently had never heard of expanded metal or seen it in the store was standing in front of shelf with a sign on it.

The sign said "Expanded Metal". biggrin.gif

I guess you have to know what it is before you can direct the customers to it. wink.gif

post #8 of 18
if you cant find it locally go to McMastercarr.com they have everything you could possibly want for just about anything thats Legal!
post #9 of 18
its ussually in the aisle with the hardware(nuts and bolts) i have seen it in all the home depot and lowes around pittsburgh
post #10 of 18
I got mine from a local trailer manufacture.
post #11 of 18
I got that kind of look when I asked about mdf at Menards once. Could try saying sheet steel.
post #12 of 18
I got the same treatment when I asked at multiple Home Depots and Menards. No one knew what it was and where the sheet metal is, there is none. So I know exactly what your talking about!
post #13 of 18
Thread Starter 
Thanks for all the help guys........and Jeanie........I now have some idea of where to look. This sure is frustrating.

Take care, John
post #14 of 18
post #15 of 18
As a welder and fabricator, I can tell you that you do not want to get your metal at Menards or any other Home store. You will pay thru the nose. Any decent welding shop or your local steel supplier will have what your looking for. In fact, most steel yards have items that are less than perfect, meaning that maybe the item does not lay flat, has a bent corner or bend ect. These are usually half off. Hope that helps.
post #16 of 18
BBQBudda had talked about Yalesteel one time so I tracked down their ebay store


12" x 48" 9 gauge 3/4 expanded $14.56 with $10-12 shipping
I like to watch the lots, I scored four pieces of 24" x 7.25" for $23.?? shipped
post #17 of 18
Thread Starter 
Well I found my expanded metal at a commercial supply house here in Pittsburgh. I gave up on Home Depot and Lowe's. The counter guy was very helpful and said he would cut it to my dimensions so I didn't have to buy an entire sheet.............Now I'm ready to go!

Thanks to all for your help..........I love this place!

Take care, John
post #18 of 18
i cant find it anywhere around me either. just set some brinks under my charcoal grate, and it works wonders!
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Charcoal Smokers
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Charcoal Smokers › Expanded Metal?.........Do I Have Three Eyes?