or Connect
New Posts  All Forums:Forum Nav:

Cleaning A GOSM

post #1 of 12
Thread Starter 
Hi all, with the weather warming up a bit planning on getting the power washer out and giving the smoker a good cleaning....couple questions if I may:

1) I have that black bubbley stuff that peels inside the smoker....should I try to peel it all off? And what to use?

2) After I power wash it and let it dry really well, will I need to re-season it??

3) Anything else I should be aware of before I do this?
post #2 of 12
You sound like the kind of person who post this type of question so that you can have your husband clean the darn thing......
post #3 of 12

I would scrape with a plastic scraper so you don't scratch the finish off. Otherwise it sounds good.

Not much to re-season unless you get down to the original finish.

Take care, have fun, and do good!


post #4 of 12
Thread Starter 
lol....I thought you were downstairs whatching the game...you know this doesn't speak well of us that we need to communicate through a forum.icon_lol.gificon_lol.gif

Hey, isn't it 5:00 oclock somewhere?????icon_mrgreen.gif
post #5 of 12
You sure picked up on that one real quick....icon_lol.gif
post #6 of 12
I would remove the burner and ignitor if your using a pressure washer or a hose. Heres another tip, I have a weed burner I use to fire up my BGE and Drum smokers and I removed the grate holders and hit the inside of the GOSM with the torch and the bubbly crud you referred to is easily scraped off with a putty knife. Be careful on the door and near the thermometer!
post #7 of 12
You guys remember what you do and you can clean mine in June. icon_evil.gif It should be ready by then. PDT_Armataz_01_28.gif
post #8 of 12
Thread Starter 
lol.....icon_eek.gif What....cook and clean????icon_lol.gificon_lol.gif
post #9 of 12
SURE you did!!! Sounds like a trick right up my sleeve too!!!
post #10 of 12
Thresea, I use a product called "Greased Lightining" (silver bottle with a yellow lightining bolt on it). Scrape out your grease pan, spray the inside of the GOSM and the grease pan and then hit the thing with the power washer. Fire up the GOSM to dry that baby out and a quick spray with a vegetable oil out of a spray bottle and relight the burner, turn the gas control to high and close the door. An hour later, shut the gas off but leave the GOSM closed up 'til it cools off.
post #11 of 12
Thread Starter 
Thanks all, Ducth, I will look for it, great idea, kind of like Easy-Off for your smoker. Thanks!!PDT_Armataz_01_34.gif

icon_mrgreen.gificon_mrgreen.gif That's my story and I'm sticking to it!!!!!icon_lol.gif
post #12 of 12
Dutch, that sounds like a lotta work. Regarding the power wash, do you have to remove or protect the burner unit? Do you have problems re-lighting it?

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Propane Smokers