or Connect
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Electric Smokers › MES 30 Mailbox Mod Question
New Posts  All Forums:Forum Nav:

MES 30 Mailbox Mod Question

post #1 of 3
Thread Starter 

Hello,

 

I smoked a pork butt this past weekend. I love the Pellet Smoker, however I decided that I want to do the mailbox mod. I was wondering, Do I need to take out the chip loader and the tray? If I put in a 3in pipe, it only goes in a half inch.

 

If someone had a photo of their 2.5 with the mailbox mod done to it. that would be wonderful!

post #2 of 3
My pipe only goes in about 2 inches. I have no issues. I run with the chip tray out. You might also want to look into putting a deflector above the heating element to funnel the heat towards the center. I'm sure if you do a search for mods you will get an idea. Check out Bears step by steps page. He uses MES and has a bunch of info. Good luck.
post #3 of 3
Oh. One more thing. You can cut out the metal and have it go in farther. But I left mine alone as for shorter smokes I use regular chips. So far I have had no issues.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Electric Smokers
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Electric Smokers › MES 30 Mailbox Mod Question