or Connect
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › TA4 snr used as on/off
New Posts  All Forums:Forum Nav:

TA4 snr used as on/off

post #1 of 3
Thread Starter 

Wired a TA4 for on/off. PID functions are all Off. oUd is set to cool. Therefore, if PV is higher than SV, out1 light is on. Using a SS relay input of 2.5 to 30. Output 120 vac. However, the input reading on the relay using a meter is 1. No reading on the output side of the relay. 

 

Any ideas would be helpful.

 

Thank you.

 

Using a light as a load when cooling is called for. Out1 is lit also.


Edited by kimsbrew - 8/11/15 at 4:54am
post #2 of 3

...my first major in college was electrical engineering and I still didn't follow that.

post #3 of 3
Quote:
Originally Posted by OkieDave View Post

...my first major in college was electrical engineering and I still didn't follow that.

yeahthat.gif
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Smoker Builds
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › TA4 snr used as on/off