or Connect
SmokingMeatForums.com › Forums › Announcements › Roll Call › new Georgia smoker
New Posts  All Forums:Forum Nav:

new Georgia smoker

post #1 of 12
Thread Starter 
This is a great forum. I am building my first smoker and have enjoyed reading posts for some terrific advise. I am a heavy equipment mechanic with a good bit of fab experience. We have a really big family and cookout a lot ,I decided it was time to get into smoking instead manning 3 grills.
post #2 of 12

There you are! Hi again and welcome to the finest BBQing and smoking and most everything else website there is. Glad to have ya.

post #3 of 12
Thread Starter 
Thanks
post #4 of 12

texas.gif  Good evening and welcome to the forum, from chilly, ice melting day here in East Texas. Lots of great people with tons of information on just about  everything.

 

Gary

post #5 of 12

Good evening from a fellow GA member, I'm up in the Dahlonega area.  Welcome to the forum, the search bar will yield you many of the answers to questions you will have.  Good luck, friend and get ready for that snow tomorrow.

post #6 of 12
Thread Starter 
Thanks. I'm as ready I get. I'm in the canton area seems we are always borderline. Yall be careful up there.
post #7 of 12

Sure thing.  The ice really got us with the power outages last week so we'll see how these pines handle the snow

post #8 of 12

Glad you joined the group. The search bar at the top of any page is your best friend.
About anything you wanna know about smoking/grilling/curing/brining/cutting or slicing
and the list goes on has probably been posted. Remember to post a QVIEW of your smokes.
We are all smoke junkies here and we have to get our fix. If you have questions
Post it and you will probably get 10 replies with 11 different answers. That is
because their are so many different ways to make great Q...
Happy smoken.
David

post #9 of 12

I like watching smoker builds,  How big and what type are you going with ?

 

Gary

post #10 of 12
Thread Starter 
Thanks themule69 . Gary s , I'm building a 120 air tank. I have a thread started in reverse flow. Hopefully I'll get a good start on it tomorrow and get some pics up. I'm using a 80 gal tank for part of the firebox and the warmer. I'm probably making it harder but luckily I like to work.
post #11 of 12
Thread Starter 
Quote:
Originally Posted by IggyThump View Post

Sure thing.  The ice really got us with the power outages last week so we'll see how these pines handle the snow
.

Hope all went well up there . It wasnt near as bad around here this time.
post #12 of 12

Use what you have, nothing wrong with that. The RF I use was built with stuff we had laying around, only thing we bought was the expanded metal.

 

Gary

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Roll Call
SmokingMeatForums.com › Forums › Announcements › Roll Call › new Georgia smoker