or Connect
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › Reverse Flow › heat plate questions
New Posts  All Forums:Forum Nav:

heat plate questions

post #1 of 3
Thread Starter 
I'm building a 20 diameter cc and fire box. CC will be about 40 inches total. What's the opening size between the two need to be. And how far above my heat plate does my cooking rack need to be.
post #2 of 3

Here is a link that will explain how to size your smoker.

 

http://www.smokingmeatforums.com/t/161795/is-feldons-calculator-really-flawed

 

Usually guys put the grates about 3-6 inches above the plate.

post #3 of 3

After you check out Len's link then you can look at mine.  I built a 20" smoker that is 36" long.  My rack is 4 inches above the plate. 

 

http://www.smokingmeatforums.com/t/139464/building-my-first-pit-i-am-excited-20-pipe-backyard-smoker 

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Reverse Flow
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › Reverse Flow › heat plate questions