or Connect
SmokingMeatForums.com › Forums › Announcements › Roll Call › low presure burners
New Posts  All Forums:Forum Nav:

low presure burners

post #1 of 6
Thread Starter 

i need three low presure burners 40 inches long, can it be done?

post #2 of 6

texas.gifHello and welcome from East Texas. This is a great site, lots of information and great people that are willing to throw in their two cents worth on about anything.   

 

Gary

post #3 of 6
Thread Starter 

thanks gary.what is your opinion on how to build a 40 ich long low presure burner what should i use

post #4 of 6

More information needed, Are you building a smoker? already have one ? is this what the LP burners are for ?  Pictures would be helpful.

 

Adding burners can be done but can be tricky and Dangerous There were a couple of recent threads about adding burners. Oxygen supply is the big problem. If not done correctly you my make the six o-clock news, Don't want that. Provide as much information and pictures as possible and I am sure you will get enough information to get you going in the right direction and safe. I know RibWizzard has done this before and can probably tell you the best way. Also Dave Omak is very knowledgeable.

 

Gary

post #5 of 6
Thread Starter 

ill have to get back with pics

post #6 of 6

Hello Ron and welcome.  Have a look at this.  Dave built his burner and did a good job posting the tutorial.  Hope this helps.  Good luck.

Danny

 

http://www.smokingmeatforums.com/t/140513/daves-smokehouse-part-9-test-runs

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Roll Call
SmokingMeatForums.com › Forums › Announcements › Roll Call › low presure burners