or Connect
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › Smoke Houses › what to line my smoke hopuse with
New Posts  All Forums:Forum Nav:

what to line my smoke hopuse with

post #1 of 4
Thread Starter 

I have a 4foot by 6 foot wood building with tin on the outside I am going to insulate it with foam what should I use for lining the inside wood or some kind of metal?

post #2 of 4

Hello cherrywood.  I have not built a smokehouse.  From reading posts on here, Most folks line theirs with Durock.  It's available at Lowe's.  You can also seal the seams with high temp food grade silicone for some added piece of mind.  Good luck.  Keep Smokin!

Danny

post #3 of 4
Quote:
Originally Posted by cherrywood View Post
 

I have a 4foot by 6 foot wood building with tin on the outside I am going to insulate it with foam what should I use for lining the inside wood or some kind of metal?


I would suggest you consider using unfaced fiberglass insulation... just for the safety aspect of a fire....

 

What source of heat are you planning on.... source of smoke...  temperature ranges you have in mind.... 

 

Dave

post #4 of 4
I considered this post when thinking up ideas for mine and am going to use unfaced/durock as Dave suggested. One other suggestion, as this is what I am going to do is if you plan on installing an air vent I would recommend using some High Temp Oven Paint on any exposed wood areas.

http://www.lowes.com/ProductDisplay?partNumber=303288-90-241169&langId=-1&storeId=10151&productId=3744905&catalogId=10051&cmRelshp=rel&rel=nofollow&cId=PDIO1
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Smoke Houses
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › Smoke Houses › what to line my smoke hopuse with