or Connect
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Propane Smokers › My Masterbuilt 30" mods
New Posts  All Forums:Forum Nav:

My Masterbuilt 30" mods

post #1 of 3
Thread Starter 

Upon buying this smoker I searched high and low for what people do to modify these. There really isnt much info out there so I hope this post will add to that.


Issue #1, the chip tray


Everyone has a different way of dealing with this, heres mine.



I left the stock chip tray in there and used the stock water pan as my new chip tray, only been using chunks.


Issue #2, the water pan


My first smoke on this thing the waterpan would run dry almost every hour, so I went to walmart and got a 13x9-2in deep pan (you can see in the pic above). It slides in (with some force needed) on the stock rails with no mods needed, and still pulls out enough to refill during smoking only opening the bottom door.


Issue #3, Insulation


Went to home depot, bought some Hardibacker board 1/4" thick. Cut it up, stuffed it in.




why did I do this? why not! Actually living in new england the weather is only gonna get colder by the day and I wanna play with this thing year round(as much as possible).


onto the door....




thats the nomex gasket 


Issue #4, Temp Regulation


no pics of this yet but I bought this from amazon. It's the Bayou Classic M5HPR Regulator Assembly to replace the stock assembly(just gonna swap in the stock regularor



Im still planning on adding the Master Forge smoke stack and adding wheels of sorts.



This thing makes some great BBQ, the mods have defiantly helped.


Off site links deleted per the Terms of Service by SmokinHusker.

post #2 of 3

Welcome to SMF!


Nice start on the Masterbuilt mods. You might also find other mods by using the search bar at the top of the page. 


I see this is your first post - how about swinging by Roll Call and introducing yourself and receive a proper SMF welcome!


Please read the Terms of Service (if you haven't already). Off site links are not permitted per Jeff (the owner).


Again, welcome to SMF!

post #3 of 3

Which Bayou classic regulator / needle valve is the one to get?   The 0-30 PSI Adjustable one M5HPR-30 or the 10PSI one M5HPR-1?



New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Propane Smokers
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Propane Smokers › My Masterbuilt 30" mods