or Connect
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Charcoal Smokers › WSM 22.5, Grommet's from Cajun Bandit... NEED NOOB HELP!
New Posts  All Forums:Forum Nav:

WSM 22.5, Grommet's from Cajun Bandit... NEED NOOB HELP!

post #1 of 5
Thread Starter 

OK..  I purchased the BBQ Sensor Grommets from Cajun Bandit, but they didn't come with any instructions.  I'd like to make sure I get these things in there correctly, because I don't want to run into an issue later with meat on the rack.

 

I am struggling with figuring out how to make it work.  I took the bolt out of the top "grate holder" but can't figure out how it's supposed to work.

 

Any help is appreciated.

 

Thanks!

post #2 of 5
Thread Starter 

I ordered the 3/4 grommets because I've got the maverick 732, but these definitely do not fit thru the hole where the bolt goes.

post #3 of 5

Well I never have used the Cajun Bandit eyelets, but here is a mod I came up with a year or so ago that is very popular for getting eyelets in on a WSM. They are plenty big so I can fit up to 3 90° probes at one time with no issues.

http://www.smokingmeatforums.com/forum/thread/94076/wsm-mods 

 

You might be able to install the cajun bandit ones in a similar fashion?

 

 

post #4 of 5

I don't have those grommets either, but it sounds like you just need to drill the hole a little bigger.

post #5 of 5
Thread Starter 

Yeah, it definitely looks like I'm going to need to drill a hole.

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Charcoal Smokers
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Charcoal Smokers › WSM 22.5, Grommet's from Cajun Bandit... NEED NOOB HELP!