Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
Recent content by mikemckinney
Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
Thanks, Dave!
I found it on the Feldon site. I hadn't read the 'fine print' and was looking for a calculator for the size and not a general rule. Mea Culpa.
Anyway, here is what I cam up with as far as the RF plate length:
As the opening should be at least as large as the FB to CC opening...
Well, I got he Oil Tank home yesterday! I didn't get as much done to it as I had hoped, but I did get some general layout designing done. Let me know your thoughts.
Tank came in at the following measurements:
67" Long by 42" tall by 261/2" wide:
Starting point for RF plate and Cooking Rack...
Ahoy, hoy!
I am picking up a 275 Gal Oil Tank on Saturday that I will be constructing a RF Smoker from.
My question is:
What Gauge of Steel should I use for the FireBox?
I will be constructing a warming chamber atop the FireBox as well, using the same gauge of steel.
FireBox and warming...
Perhaps Tristate Mechanical could be of service. I did a little research and found their phone number for you: 602-918-9136.
From the pic I saw, they should have something you could work with.
Ahoy, hoy!
My name is Mike McKinney and i live in Beaver Falls, PA.
I have been smoking meats for about 15 years, and started in a homemade smoker I called "Frankenstein."
Parts from an old charcoal grill and a galvanized garbage can were connected with a flexible aluminum dryer hose.
It was...
Good Idea. Here's the rub, though. I have on street parking and would have to empty it into the gutter. The soap and water aren't the concern, it's the oil residue getting into the sewer system.
Also, I have been doing some early planning on the dimensions of the fire box and warming chamber...