adding charcoal to fire

Discussion in 'Grilling Tips' started by duggy, Oct 23, 2010.

  1. Hey all

    I have a question. When adding more charcoal to the smoker, do they need to be lit and left to burn a little bit in the chimney starter or can I just add it directly (unlit) to the fire? 
     
  2. tom37

    tom37 Master of the Pit OTBS Member SMF Premier Member

    My drums burn like the minion method so I have never added coals to them. But my RF gets coals added after they are lit and start to ash. A little bit of coals and a little bit of log wood, which ever works at the moment.
     
  3. meateater

    meateater Smoking Guru SMF Premier Member


     LA CRESCENTA.......I was raised there!!
     
    Last edited: Oct 23, 2010
  4. jirodriguez

    jirodriguez Master of the Pit OTBS Member SMF Premier Member

    Yeah... if you can at least get the new stuff heated... not necisarrily fully lit, but almost fully lit works well. Main thing you want to do is avoid having all the "start up" smoke from the charcoal going into your meat.... makes for unplesant flavor.
     
  5. hmmm wouldn't that mean that using the minion method is not a good idea as well? Since it'll have the "start up" smoke from the charcoal 
     
  6. rw willy

    rw willy Smoking Fanatic OTBS Member

    I've heard that point of view before.  I've thought that every time I use my UDS.  But, no unpleasent taste on my smokes...so.
     
  7. alblancher

    alblancher Master of the Pit Group Lead OTBS Member

    I add charcoal or splits to my small offset all the time.  If you are using a quality lump charcoal all the bad stuff has already been burned off.  Well cured splits do not have enough moisture to cause a problem with sooty smoke.  The most important thing in my opinion is not getting a temp spike when you add fuel.

    Al
     

Share This Page