Thermo calibration question 2 - please help

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

vegas_frak

Fire Starter
Original poster
Aug 5, 2007
67
10
Mobile, Alabama
Sorry to post double, but need some help.

Just breaking in a used Smoke King Deluxe (Bandera style smoker) I replaced the in the door thermo with a 3 inch lead large dial. While installing it I accidentally put a little too much whoomp on it and moved the guage.

So I pulled it out and put some water on to boil then set the dial at 220 degrees. Now I am checking it with some fire in my box and I have a digital therm on a great at the same level as this one and they are about 30 to 40 degrees different.

Should I set the dial to what the digital reads, go buy another dial and be more careful or just forget about it???

Hope someone has some insight before I cook tomorrow.

Thanks!

Vegas Frak
 
I would have set the therm to 212 when boil testing. It's not unusual for the surface mounted therm to read a bit lower than a digital at grate level. I would just remember to adjust for the difference.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky