Testing

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

scott t

Newbie
Original poster
Dec 3, 2005
23
10
SE Pa
Here are some pictures of my modifications. See my description in my original post.



Here's the base I made out of angle iron and flats. It's 8 1/2" tall to match where the fire bowl originally was placed in the chamber.




Here's a picture of the expanded metal grate.



Here's the damper assembly fully open.



Now fully closed.


The fire bowl assembly with ash tray (pie tin)



Detail of cut down leg.



The whole thing put together.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky