Seasoning Day!

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.
Hello Hopmeister.  Looks like you have the process down.  Get that temp up really high and hold it for a couple hours to insure the oil really gets into the metal.  I used wood burners for years but a tip I have learned here was to rub down the outside with a light coating of veg oil after each smoke.  After cool enough to touch but still as warm as possible.  Then go back after completely cool and wipe off any excess oil.  I had just never thought of doing that but makes perfect sense to me.  Helps protect the outside from rust.  After all you paid a pretty penny for that rig so you want it to last.  Hope it helps.  Good luck.  Keep Smokin!

Danny
 
Thank you brother! have a fantastic weekend. its game on tommorow with brisket and baby backs!
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky