My Flagpole Build

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

BGKYSmoker

Nepas OTBS #242
Original poster
Staff member
Moderator
OTBS Member
★ Lifetime Premier ★
Group Lead
Dec 25, 2010
14,130
11,753
Rineyville, KY
The building phase.

PVC cut to 4'


T on the end cemented.


Cement the cut off 1' to the other end of the T.


Cut the other piece of pvc to 4' and cement the 45* to it.


Cement caps on each end of the pvc.


No cement on the lower part of the T. Drill 1/4" hole and use the bail pin.


Drill for the 2 eye bolts with clevice.


Hammer the 24" spike in the ground bout 12"


RED WHITE AND BLUE



Going to spray paint the pole white to cover the markings on the pvc. Got another to make for my POW/MIA Flag
 
Nice, nepas!  Very creative, thanks for sharing this.
usa.gif


Red
 
Thanks nepas, great work. Wish I could spend more time in the RV, I'm going crazy just waiting for the Memorial Day trip! I use the Star Spangled windsock for my campsites, but that's a great idea.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky