Jalapeno Grill

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

ron50

Master of the Pit
Original poster
OTBS Member
SMF Premier Member
May 14, 2007
2,357
143
FL
I'm looking to purchase a jalapeno grill. I've seen many online made of stainless steel. Any recommendations as to which one or a specific company?
 
I wouldn't pay 24.95 plus shipping for one....
PDT_Armataz_01_27.gif


If you have Ebay check these links....

http://cgi.ebay.com/New-Stainless-St...QQcmdZViewItem


Seems a bit overpriced for a pan with holes in it.....but that's just my opinion.
PDT_Armataz_01_05.gif
 
I felt the same way, so I just made one myself. Got a piece of alumium about 1/8 thick. 12x5" drilled about 24 one inch holes in it. Screwed on a couple of pieces of L shaped alumium for legs. Works just fine. Final cost...... 0. Now that I can live with. But you really have to get one some how. Once you start eating ABT's you can't stop. "Bet you can't eat just one"
 
You can always use expanded steel sheets that has the holes that are approx. 1-1 1/2 inches in size. Cut it whatever size you want, get four 3 inch bolts, some washers and nuts to make legs for it and you're good to go.
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Clicky