gosm modification

Discussion in 'Messages for All Guests and Members' started by dmack, Jun 8, 2009.

  1. dmack

    dmack Smoke Blower

    Maybe some of you can help me. I have been using my GOSM for a year now. I've had great results. I am thinking about a new mod to deal with ash build up in my pan. Right now I am using a cake pan to put chunks and lump in. I do get quite a bit of ash build up and this slows the smoke. What I'm thinking about is a 2 tray system. I would stack the trays. The top tray I want to cut out the bottom and replace with some of that heavy metal mesh (thinking about the stuff that many of you use-not grates but like a diamond mesh). The bottom tray should catch the ash. I'm thinking I can easily lift out the top tray holding the wood, and dump the ash out. What do you think? I know I am over thinking this but I love doing these mods. Also where can I pick up that diamond mesh? I don't need much.
     
  2. pignit

    pignit Master of the Pit OTBS Member SMF Premier Member

    It's called expanded metal and I just bought some at Home Depot. It was located where they keep the angle iron and raw metal. Sounds like you got a plan. It's important to keep those ashes fallin away from the fire. Makes for a hotter fire.
     
  3. flash

    flash Smoking Guru OTBS Member

    I found this down at the local Wal-Mart. I had to re-adjust the handle on the charcoal pan, otherwise it fits great and the ash falls thru to the pan below.
     

Share This Page