Can't buy - Build!

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

travcoman45

Master of the Pit
Original poster
OTBS Member
Jan 19, 2008
4,114
34
A Holler in North Iowa
Well, puttin in the new wood furnace in the shop, ran inta a couple a problems. The window I'm eleminatin fer the new chimney, well, lets say there has been a leak, the whole wall under that thing was rotted out, sheetin an all!

So, spent a day an a half properly rebuildin that.


The window an wall mostly back together, before I put the interior wall back up. The hole there is where the chimney will exit.

Got all the chimney parts, needed a wall braket to mount it, you think ya can find one a them? Nobody carries them anymore, so I built one.



Used my ring roller to roll out the pipe clamp an bent up some brackets, riveted the brackets to the ring an a nice coat of cold galvanized to keep it from rustin.

Know I just need to get the furnace over in the right spot an hook it all up. Should be operational next weekend. Be nice havin wood fan forced heat in the shop! Gonna make smokin lots more enjoyable this winter!
__________________

image.png
 
Nice job Tip, but I think you're spoilin yourself with heat...whats next runnin water? J/K that should make life a lot nicer....maybe get a recliner and cable tv.
 
You have done a fine job there tip. Are you going for the cable tv now you mite just spoil yourself with all these comforts on a modern day house.
 
Don't forget to install a Kegerator with 5 different premium beers on Tap... Ya gotta keep them thar guests happy...
icon_mrgreen.gif
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky