60 gallon tank for reversflow build

Discussion in 'Classified Ads' started by duck killer 1, May 8, 2010.

  1. duck killer 1

    duck killer 1 Smoking Fanatic SMF Premier Member

    i have a 60 gallon tank that was used for soap concentrate in a carwash if someone wants it. i stripped all the powder coat off the outside of it and cut all the stubbs off, then i cut the opening for the firebox to cook chamber hole, and i cut the door out. on 1 side there is 5- 2" or 3" holes where i cut out the stubbs that will need to be filled in and blended back. the inside is pitted like little craters but could be cleaned up with a grinder. i decided i wanted a bigger smoker and so i don't need this tank. it would make a real nice start for somebody. i would be happy to give it away as it didn't cost me anything when i picked it up and i know how hard it is to come up with good tanks! this one is all 1/4" thick steel so it is a good one. if interested shoot me a PM
    thanks!
    duck
     
  2. duck killer 1

    duck killer 1 Smoking Fanatic SMF Premier Member

    the tank has been spoken for. thanks for lookin!
     

Share This Page