50 foot vacuum bag roll dispenser

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

muddydogs

Smoking Fanatic
Original poster
Oct 19, 2016
330
73
Ogden Utah
Didn't have anything to smoke this weekend so I put together a holder / dispenser for the 50 foot rolls of vacuum bags. Pic shows it holding an 8" roll and its wide enough for the 11" rolls. I used what I had on hand so the base is a 12" wide shelf board, side boards are oak, holder and cutting strip are poly cutting board and the dowel and back are pine only thing spent on the project was $2.00 for 4 chair slides to use as feet.

Works slick, just pull out the desired length of material then run a box cutter down the side of the poly cutting strip to cut it off.

 
Last edited:
  • Like
Reactions: dirtsailor2003
Looks good. I made one years ago when I was using my first vacuum packer.

Fortunately the Vacmaster that I have now can hold the rolls
 
Oops Almost forgot.

points1.png
 
Looks like it would work very well.

Like Case I have the Vacmaster & it holds the 50' rolls.

But when I had my Foodsavers, it surely would have come in handy!

Al
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky