Search results

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
  1. B

    MES overheating

    Your model is the last one listed so it may work. I have the same model that you have and it looks like a different board. I had this same problem with mine a few weeks ago and like you didn't want to spend the $$. I did break down and got the Aubor PID. So glad I did. I set the temperature at...
  2. B

    Favorite widely available bourbon or whiskey

    Bourbon 1792, Scotch Glenfidich 12
  3. B

    PID 4th of July sale

    Auber has the WSD-1200H PID on sale until July 7th for $147.00. Not available on Amazon but I found it on there WEB site.
  4. B

    MES Overheating

    Tallbm, Thank you so much for the detailed expiration . The link to the MES rewire was also very helpful. Looks like something I can do easy enough. I have already removed the circuit board cover. So after they rewire the MES is plugged into the PID controller and the PID controller has its own...
  5. B

    MES Overheating

    Sorry for the confusion My controller was the original MES controller. The other one was from a different MES.
  6. B

    MES Overheating

    I pulled the cover off the control board and it looks like new. No hot spots or bulging components.
  7. B

    MES Overheating

    Yes that was one of the first things I tried. Thanks for the suggestion,
  8. B

    MES Overheating

    Just tried again with 2 Taylor and a TermoPro remote thermometers/ All three were close 1 or 2 degrees from each other. The MES control panel read about 11 degrees cooler. Again the Red LED light went off at 200 as I had it set, but temps went up to 300 and kept climbing. So I shut it down.
  9. B

    MES Overheating

    It stayed over temp
  10. B

    MES Overheating

    I have an older MES model 20070910 I can set the temp to 200 and start heating. When it gets to 200 the Red LED turns off, but it continues to heat going up maybe 40 more degrees. I put my controller on another smoker and it works fine. Used the other controller on my smoker and it still...
Clicky