Search results

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
  1. azhunter80

    Commercial Fridge Build

    looked up the specs and found that the interior is aluminum. Got the interior out with minimal damage.... I'll keep posting the progress.
  2. image.jpg

    image.jpg

  3. azhunter80

    Commercial Fridge Build

    The innards of the fridge are not magnetic..... So it should be ok correct? I still plan on taking it out just to get the insulation out. But will clean it up and re use if possible.
  4. azhunter80

    Commercial Fridge Build

    Thanks TX, I'll try a magnet a lil later and cross my fingers it ain't magnetic lol -Jeremy-
  5. Commercial Fridge Build

    Commercial Fridge Build

  6. azhunter80

    Commercial Fridge Build

    Hey everyone, been quite a long......long time since I've posted anything. And last night I decided to start my next build. Here's a question, on this stainless fridge, what are the chances the inside being stainless? I believe it's galvanized and will have to get it out.
  7. image.jpg

    image.jpg

  8. azhunter80

    Starting my build...

    Well I started framing the inside. Been busy with volunteer stuff around town and havent had a chance to work on it very much. But trying to get it done this weekend! More to come this weekend...
  9. freezer4.jpg

    freezer4.jpg

  10. freezer3.jpg

    freezer3.jpg

  11. freezer2.jpg

    freezer2.jpg

  12. freezer.jpg

    freezer.jpg

  13. azhunter80

    SOuthwest burger Fattie...can I call it a Fattie?

    It was awesome....I ended up making several over the past few weeks. All a little different and were absolute hits!  Can't wait till my build is done and get some real smoking done! I'll be posting an updated pic today.
  14. azhunter80

    Starting my build...

    hey there....been a while since an update...So i have the smoke generator complete and its AWESOME!!!   I almost have the frame work on the inside complete so then I can insulate and lay the aluminum inside.  But here is a question.....no galvanized in the smoker right? So what about the stack...
  15. azhunter80

    Ground chuck jerky possible? and any jerky gun tips?

    Leaner meat is the only way to go. I have never used a jerky gun...I use a pastry bag and tip. works fine, cheap and reusable as well.
  16. azhunter80

    Starting my build...

    Its made from Aluminum conduit.  A supplier had a few feet laying around and sent it to me. It has 1/2" exp. metal. caps are cast aluminum. 3/4" black iron nipple and opposite the nipple the airline will enter. Its tapped at 1/4" IP.   I used a exhaust pipe expander to bell the ends a bit for...
  17. azhunter80

    Starting my build...

    Well I was able to get the whole thing gutted. Ended up having to remove all insulation. The fridge was in bad shape when I got it and stuff had leaked while in storage so rust and "juices" soaked into all the foam an created rust along the bottom. I'll get a picture loaded when I can. So in the...
  18. smokegen2.jpg

    smokegen2.jpg

  19. smokegen1.jpg

    smokegen1.jpg

  20. azhunter80

    Meat Processing

    Well folks I have some bad news...The day I was to cut our littlest one came down sick. I was unable to take any pictures because I was in a hurry to get back home with momma and the kiddos. I do apologize. I do promise to have a how to thread at the beginning of the hunting season.  Until...
Clicky