Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
Buddy has a welder so would probably try to do something like what this guy made, would cost more but got a feeling the wood would get pretty nasty over time as grease soaks in unless you have metal interior walls or something.
Mostly due to time constraints, by the time I get off work I can't be bothered to spend 2-3 hours mixing and stuffing so it's easier to just stuff and smoke on a Saturday/Sunday, also you don't have to find room in the fridge for 15-20lb of fragile meat strands if you go directly from stuffing...
Another thing that might look scary but is usually fine is if you see greenish spots after slicing, it's something called 'nitrite burn' and if you look at it from different angles it might be rainbow colored. Buddy of mine threw out several pounds of home cured bacon one time thinking it was...
Saw a few threads mentioning Smokin-It smokers and was wondering how they are for low temp smoking like sausage/snack sticks/bacon. I have a MES40 that I upgraded with an Auber PID controller and circulation and it works pretty well but I'd like the option to be able to hang more than 15lb...
Before sticking frozen meat through that I'd double check the kitchen aid has the power and isn't going to burn out its motor. The plastic one on mine worked fine grinding brisket trimmings for tallow but I've never tried giving it something like semi-frozen meat that most videos tell you to...
I finished sous vide with one of my batches and what I did was set the temp to 135 or so while I was sealing and then upped it to 155 when they were all in and gave them an hour once the water hit temp, they turned out pretty good and I didn't get much fat out but I also used a binder which I...
I pureed like 10 jalapenos one time thinking some of the heat would end up in the meat, only thing it did was give it a green tint, probably better off rubbing it down with dehydrated ones afterwards.
That doesn't end up being super salty or anything? Will have to try that
I've run into the same issue a few times, always happens when the fat side is touching the grate, wiped off what I could and cooked it up and I'm not dead yet.
If you're going to hang your next batch it's worth buying the hangers like the ones @SmokinEdge showed. The Sausage Maker sells them...
Figured that would be the consensus, I currently have a spreadsheet that I toss the weight into and it does fine. If I ever tried that method I'd probably leave the cure out of it so I at least knew that was always right, as is I mostly just cure with salt/sugar/cure as whenever I add pepper it...
Anyone know how reliable a salt/sugar/cure mix would be if you make it in a big batch? Was watching one of the Chuds bbq videos where he makes a batch of it and just seemed like due to the different granule sizes it would lead to inconsistent results with EQ curing. If it works it seems like...
I used the grinder once for making tallow from brisket trimming (renders faster in small chunks) and it worked pretty well but I think trying to use a grinder as a stuffer in general is a major pain compared to getting a dedicated stuffer since you'll have to reload all the time and normal...
The videos I've seen seem to suggest it's pretty good unlike the grinder/stuffer attachment, forget who it was but I watched a video where the guy was basically cursing at it the entire time because it was a pita.
If I want to dry casings with a fan prior to a smoke is it possible to overdo it? I have a basic frame to hang my snack sticks from when I'm cutting them to length and was thinking I could toss a cheap box fan on top facing downwards to dry them, probably do the same for bacon.
Fireboard 100%, it's built into my yoder but I also bought myself a fireboard 2 drive for monitoring snack sticks on the MES40 and eventually controlling a charcoal grill. If no one mentioned it yet one great advantage it gives you is cloud sessions and the ability to share a live session link...
You should be able to crank it up to max and combine it with something like this to control the temp, Auber makes a PID controller that I use for my smoker that would likely work as well but guessing you don't need anything that advanced for long durations...
? I mixed in 0.4 oz for my 20lb of meat, the 22% I pasted was the ingredients so people didn't have to go lookup what Cure Excellerator was. By their directions I have enough to do 4,000 pounds of meat so I should be good for life lol.
Might just be how much of the mixture is diluted sodium erythorbate? The documentation on the site kinda sucks which was why I started this thread.
https://waltons.com/cure-excellerator
If it's a typo it's one on their site
https://waltons.com/cure-excellerator/
Yea, I was going to go for 8 min like the videos recommend but it was like paste at 5 and super tacky, think the suregel does a lot to help with that.
I've tried the silicone spray as well as the brown lube they have...