• Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

Search results

  1. bruster

    Any new Michigan Members?

    Yup I know where you’re talking about
  2. bruster

    Any new Michigan Members?

    Was it down MT Morris? I lived at 7207..you had to see the smoker out front at some point in time
  3. bruster

    Any new Michigan Members?

    It very well could have been me! I lived off linden in between Stanley/mt morris I now live in MS though!
  4. bruster

    500 gallon offset build

  5. bruster

    500 gallon offset build

    Have to stand o the trailer...eventually that trailer will have up rights and a roof over it
  6. bruster

    500 gallon offset build

    First cook this weekend to see how it does..2 weeks he gets loaded with briskets,shoulders,ribs and Turkey Once I get this cook done I will start to get the floor down and build the roof on the trailer!
  7. bruster

    500 gallon offset build

    Just build it and deal with the consequences later lol
  8. bruster

    500 gallon offset build

    2 of 3 gauges mounted
  9. bruster

    500 gallon offset build

    Well the original plan was to build this as a RF but changed my mind once steel went through the roof! So I'm going back to what I started with (Much smaller then this bohemath) I'm about done just need to finish welding the firebox,cut the door,add stiffness,cut the hole for the cook...
  10. bruster

    500 gallon trailer build

    I cook every kind of cut usually so i like the hot side vs cooler side
  11. bruster

    500 gallon trailer build

    A 36-36-36 would have been good but 1/4” plate right bow is over 300 a sheet! Im not dropping $900 bucks to gain those extra few cubin inches
  12. bruster

    500 gallon trailer build

    That fire box isnt to far off a 250 gallon cut in half with a 2ft pipe insert.This is no longer being built as a RF..its now an offset
  13. bruster

    500 gallon trailer build

    36x32x32
  14. bruster

    500 gallon trailer build

    36x32
  15. bruster

    500 gallon trailer build

    Well decieded to build an offset instead of the RF. 1/4” plate right now is stupid exspensive and the offset look is really growing on me.So i guess ill end my smoker building where it all began lol
  16. bruster

    500 gallon trailer build

    Got the hinges wrapped up and cut the doors out.I also did the first burn out
  17. bruster

    500 gallon trailer build

    Its alright..i ended up finding some 3/4 tube and 5/8s rod
  18. bruster

    500 gallon trailer build

    Never thought about that..so basically use the bullets..weld one end to the tank then make a tab off the other end of the hinge and weld to the flat stock
  19. bruster

    500 gallon trailer build

    Got the doors laid out for the most part..right now they are 34x23.5 which i may take that to 34x24.Tried finding hinge material today but no luck so i may just end up ordering the 4.75 bullets and calling it a day
  20. bruster

    500 gallon trailer build

    Sorry..got busy at work and didnt get a chance to talk about the new build! Its going to be a 500 gallon RF on a 24ft trailer.Need to get the cooker done and knock a few cooks out then ill move my attention to the trailer.My plan is to reinforce the trailer and build an enclosure with steel and...
Top Bottom