• Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

Search results

  1. Paulie Walnuts 440

    V shaped fire management basket

    Does anyone have for sale any V shaped fire baskets for wood smokers? Been waiting for lone Star to get them in stock and it's been weeks since they have and when k emailed them they said they aren't too sure when.
  2. Paulie Walnuts 440

    Preserving smoker over time

    Hey I wanted to get some thoughts on what people do to preserve the exterior of your smoker. I see if you have surface rust some suggest sand with 50 to 80 grit then clean surface with like a mineral spirit for a clean surface area then apply high heat paint and call it a day or some apply...
  3. Paulie Walnuts 440

    Heat shield/deflector in offset

    Hey I wanted to know what is a sort of standard size and thickness for a heat deflector or shield in a standard flow offset smoker that is actually effective ?
  4. Paulie Walnuts 440

    Cleaning the offset smoker after use

    Hey wanted to get everyone's advice on cleaning the smoker after using it. I saw Lang bbq where they steam clean and hose out the bottom briefly while they still have a fire going. Any suggestions on cleaning ?
  5. Paulie Walnuts 440

    Burning wood on a fire grate

    Hey everyone I wanted to get some advice on burning wood on a fire grate thats in my offset smoker. It seems like most of my coals fall through the grate onto the firebox and seems like it's harder to maintain temps like that. I ordered the lone star grills firebasket and waiting on that but...
  6. Paulie Walnuts 440

    Air flow issues

    Hey all I wanted to pick everyone's brain about air flow in my offset standard flow smoker. I have a nice bed of coals inside and I have the door cracked and usually maintain temps around 275 to 250 all around. However sometimes when needing to add some more wood I notice my wood will smolder...
  7. Paulie Walnuts 440

    Small little pieces of unburnt wood on grate

    I am burning hickory in an offset standard flow smoker. and i keep noticing on the grates closest to the fire that there are particles of wood on the grates. Any ideas? Fire appears to burn clean
  8. Paulie Walnuts 440

    Particles on smoke grate

    I noticed on the bottom and top grates inside the wood smoker there were what looked like actually small pieces of wood particles unburnt on the grates and i have no idea why?
  9. Paulie Walnuts 440

    Help on achieving a solid bed of coals?

    Hey I noticed my bed isn't as well sustained throughout long cooks. I see some folks who light a big fire in the beginning then let it all burn down and then your coals will be more substantiated?
  10. Paulie Walnuts 440

    Grate Gauges ?

    Hey I was wanting to know what you folks recommend for inside grate gauges. I suppose it's one thought having knowing what gauges are telling you when the lids are closed. However I feel as if the top and bottom grates inside would tell a different story. Any recommendations I'm all open to.
  11. Paulie Walnuts 440

    Wood identification ?

    Hey I wanted to make sure this is for sure hickory..
  12. Paulie Walnuts 440

    Cleaning your offset smoker?

    I wanted to get some input on how people clean their smokers when done cooking?
  13. Paulie Walnuts 440

    Wood availability South East PA region

    I wanted to know if anyone has oak, maple, and cherry available in the south east region of PA?
  14. Paulie Walnuts 440

    Smoked rabbit ?

    I wanted to know if anyone has ever smoked a rabbit before? Any ideas please share I think bacon may be a nice top layer...
  15. Paulie Walnuts 440

    Installing Tel Tru Temp Gauge

    I recently purchased two Tel Tru gauges and my smoker already has a 1/2" NPT set up for it so i just easily can thread the gauge and be done with it but trying to center it is a but challenging so should I try and get it just about right and then use that serrated kind of not to help tighten it...
  16. Paulie Walnuts 440

    Smoke stack fully open?

    Hey everyone I wanted to get some input on when I'm trying to maintain temps around 250 or so if I should leave the stack wide open regardless of what my firebox dampers are at or if my damper is partially open does that mean keep smoke stack partially open ? I've been cracking my firebox door...
  17. Paulie Walnuts 440

    Buying direct from organic farm

    After your done smoking the process for cleaning? I've seen lang bbq bring temps up to 325 and squirt some water in there to "steam clean". Any thoughts and suggestions?
  18. Paulie Walnuts 440

    Buying organic meats direct from farm

    Ive recently been buying 100% grass fed organic. Beef from a few nice farms in PA. Founds some nice people and great tasting meat but with a price tag. I got a cut of spare ribs but not full rack like broke into two sections and freezer packed. Is this a common practice or should I be more...
  19. Paulie Walnuts 440

    Lava Lock Gasket Size Reccomendation?

    Hey I wanted to see would be a good way to determine size for gasket I should buy to seal my two cooking chamber doors? I see it leaking and know i need a gasket just unsure how to determine thickness needed without making the gap worse.
  20. Paulie Walnuts 440

    Grates inside the smoker

    Ive recently purchased a standard flow off set 250 gallon smoker and just got done seasoning the smoker. I cooked some food on it and noticed that on some of the plates we were eating on had some black residual left behind. Can anyone help me figure out what's going on because I did clean the...
Top Bottom
  AdBlock Detected

We noticed that you're using an ad-blocker, which could block some critical website features. For the best possible site experience please take a moment to disable your AdBlocker.