Toggle sidebar

Recent content by weldifier

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
  1. weldifier

    Need some help with this old workhorse

    Yes this actually clears it up. Picture 1 is exactly what had in mind. Thanks.
  2. weldifier

    Need some help with this old workhorse

    This is great help everyone and seems fairly straight forward. So to summarize, move exhaust to back, insert baffle plate, build rib box on front with a plate to open and close access to rib box. And if I want a holding box build it over the fire box with no smoke access and it should stay...
  3. weldifier

    Need some help with this old workhorse

    So this explains a lot. So the box at the front is a holding box and the one at the back is the rib box? This is pretty much what I want to do. So how do I convert the cc to reverse flow?
  4. weldifier

    Need some help with this old workhorse

  5. FB_IMG_1432267758689.jpg

    FB_IMG_1432267758689.jpg

    • weldifier
    • Media item
    • Comments: 0
    • Album: Need some help with this old workhorse
  6. weldifier

    Need some help with this old workhorse

    Thanks. I will do some research on that.
  7. weldifier

    Need some help with this old workhorse

    So the inside is just hollow with one grate I can probably fir 8 pork butts or 5 to 6 brisket on. I want to build a box with 6 racks that will fit 6 racks each. Not sure which end I should weld it to. Welding it over the fire box seems like it might get too hot? Also wondering what's wrong with...
  8. Need some help with this old workhorse

    Need some help with this old workhorse

  9. weldifier

    Need some help with this old workhorse

    So I have been looking for something like this for years near me, in Canada.  Not very common up here but i found it in a farmers field a few blocks from my house.  I want to add a rib rack, but dont want to jump in before i get some advice how to do it right.  Ideally i would like to get 2...
  10. 20150511_085812[1].jpg

    20150511_085812[1].jpg

    • weldifier
    • Media item
    • Comments: 0
    • Album: Need some help with this old workhorse
  11. 20150511_085748[1].jpg

    20150511_085748[1].jpg

    • weldifier
    • Media item
    • Comments: 0
    • Album: Need some help with this old workhorse
  12. weldifier

    Building a smokehouse out of a horse trailer

    Thanks Bonz.  Do you think that panelling will take 275-300F with melting or burning?
  13. weldifier

    Building a smokehouse out of a horse trailer

    A couple other things i have been wondering: should i insulate the inside of the smokehouse, as horse trailers are made of sheet metal ? should i have the firebox in or out of the smokehouse? if i line the inside with cedar will it take temps of 275F without catching on fire?
  14. weldifier

    Building a smokehouse out of a horse trailer

    Thanks Dave.  Yes, it would have to be completely gutted and painted.  I have seen kitchens built in horse trailers, but i just want the smokehouse in it.  I think it should work but wonder if there is something i haven't thought of.
  15. weldifier

    Catering Question

    I own 2 large catering companies. I would be happy to answer any questions you have. To answer your question though, 10 seems low but would depend on what is included Everything costs money including you. Figure out you cost per plate and times by 4. That will give a very rough idea where to...
See more
Top Bottom
Back
Clicky