1. Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.

Articles from daveomak

  1. Maintaining Grinder Plates and Knives

    Below are Videos 1, 2 & 3 that Cranky Buzzard put together...     I thought they would be handy in one place...   
  2. Reverse Flow Smoker... How to calculate build tutorial...

    This is a tutorial and you will need a calculator and paper to note desired dimensions... This tutorial has been proven to make an excellent operating Reverse Flow smoker...

    Here's to "Alien BBQ" and the folks that first put the calculator together and "1728 Software Systems" for this great "Circle Calculator" and all the folks at "SmokingMeatForums" , with a special shout out to Ribwizzard, that contributed their ideas and feedback while this thing was coming together..

    The smoker and how...
  3. Little Chief Smoker Instructions....

      Little Chief Operating Instructions.pdf

    http://www.smokehouseproducts.com/downloads/LCRB.pdf

    The methods in this booklet do NOT recommend using Cure #1....  It is strongly suggested, when smoking meats at low temperatures like the Little Chief has, cure #1 be used in an appropriate amount and process.....     
  4. Modifying a Totem/Big Chief Smoker with a Hotter Element for Colder Climates and Hot smoking....

    Describe 'Modifying a Totem/Big Chief Smoker with a Hotter Element for Colder Climates and Hot smoking....' here

    Several years ago I moved to a cold climate and my smoker would not get hot enough to smoke fish in the fall... even wrapped and insulated it wouldn't get hot enough to kipper salmon..... So here we go on my modification....

    Went to W-M and found a single burner counter top unit for about $10.... I totally disassembled it into it's basic parts....

    I drilled holes in the lower...
Loading...