Oregon AW131 wireless thermometer

Discussion in 'Meat Thermometers' started by smoke, Dec 26, 2007.

  1. smoke

    smoke Newbie

    First, Merry Christmas everyone! Received as a gift today an Oregon AW131 wireless thermometer. I'm having a problem with a signal between the transmitter and the receiver. The transmitter's light is blinking (instructions say that this is transmitting) the receiver's icon says no signal. I've reset both the components..has anyone else had this problem? [​IMG]
     
  2. garyt

    garyt Smoking Fanatic

    Try turning one on first then the other and if that don't work turn both off again and turn the other one on first. that is the way my Redi check works on mine the recever must be turned on and registered first.
     
  3. low&slow

    low&slow Smoking Fanatic OTBS Member

    Thats the same kind I have. Turn the transmitter on first, then the receiver. If it still dont work then I dont know. Maybe broke?
     
  4. smoke

    smoke Newbie

    Thanks, I'll try both ways...also have emailed the company.
     
  5. smoke

    smoke Newbie

    Changed the batteries in the transmitter even though the one's removed showed no discharge and the darned thing started working...also noticed , as suggested, you must power up the transmitter prior to the receiver. [​IMG]
     
  6. cman95

    cman95 Master of the Pit SMF Premier Member

    I have a OS aw131. Turn the receiver on first and then the probe. Should solve your problem.
     
  7. chris_harper

    chris_harper Master of the Pit OTBS Member

    I can turn on either one first, makes no difference. I usually turn on the receiver first, but I have turned on the transmitter first before. Works great either way for me.
     

Share This Page