First Insulated Vertical Smoker build

Discussion in 'Other Builds' started by timh, May 25, 2015.

  1. timh

    timh Newbie

    24" x24" x48".
    I have alot more done, just have not had a chance to take pics. Will update soon.
  2. pineywoods

    pineywoods Smoking Guru Staff Member Administrator Group Lead SMF Premier Member

    Looks like a great start and will look forward to more pics
  3. timh

    timh Newbie

  4. timh

    timh Newbie

    The main frame is made out of 2" X1/8" wall box tubing. The water/drain pan is made out of 1/4" plate.  The firebox is lined with 1/4" plate and  cooking chamber 12 gauge cold roll, along with the outershell and exhaust stack. It is fully insulated with 2" insulation. The doors are made out of 1/4" plate, 1" box tubing, 1" thick insulation and 12 gauge cold roll with a 5/8" fiberglass rope seal. The grates are made out 1"x 1/8"  thick angle and 3/4" x9 raised face expanded metal. The charcoal box and ash pan is made out of 12 gauge plate, 1"x 1/8" angle, 1/2" round bar, and 3/4" x9 raised face expanded metal and will hold right at 30lbs of charcoal. The outrigger frame is made out of 2"x3/16" wall box tubing with 5" casters. It weighs right out 800lbs.
    drcustombasses likes this.
  5. seenred

    seenred Smoking Guru Group Lead OTBS Member

    Looks great!!  [​IMG]

  6. comosmoker

    comosmoker Smoke Blower


Share This Page