To anyone looking for a ready made smoke stack for your smoker, that has a adjustable baffle and rain shield. Read on.
My new masterbuilt XL is coming tomorrow, I'm upgrading from a Lowe's master forge dual door, and the master forge has a smoke stack on the top, that has 3 bolt holes and a flange for surface mounting on top of the smoker, because i still want to use my master forge later i called the service department for the master forge and found out that you can order that stack for $12 with $9 shipping, so for $21 you can have a nice 2.5" dia stack and the only mod you have to do to mount it is drill some holes, and put some high temp gasket sealer under it.
I was also thinking that if you wanted to put the durarock that some people have inside the smoker as well, you can cut the piece to fit the top so that its edges set on the durarock you have running up the sides, and drill the holes for the stack through the durarock as well as the top of the smoker, get some large dia washers to use when you bolt the stack to the top, and it will help support the durarock in the center so no other reinforcement should be needed.
Least that is what i am going to try when the stack i ordered comes in, they said 7-10 days for delivery.
If you want to see what the stack looks like, look for the master forge double door smoker at lowes, you can zoom in on the photo to get a better view, and as far as i know the 2 different models of the smoker both use the same stack
Ordering information for the stack
Service Dept # (800) 963-0211 hrs 8am-6pm M-T 8am-5pm F EST
The lowes model number is 0190449
They said that they didnt use the model number for the part but used the item description but here are both
Smoker Stack - 302-02009-00
On the assembly instructions its reference id is H
Edited by 53rdcard - 6/6/12 at 2:37am