SmokingMeatForums.com › Forums › Smoking Meat (and other things) › Beef › Putting coals below the rack?
New Posts  All Forums:Forum Nav:

Putting coals below the rack?

post #1 of 5
Thread Starter 

As you can see from the picture I have my top rack removed for the moment.

 

My bottom rack is bolted in. I was thinking of un-bolting the bottom rack and tossing some coal down there for grilling.

 

Is that a bad idea to do with a smoker?

 

IMG00141.jpg

post #2 of 5

Now there's a couple of questions that come to mind right off the bat. You don't have a regular grill for grilling???? Next isn't there a tuning plate underneath the bottom rack that you want to take out??? Next thing is that's your smoker and you can do anything you want to but why is another question. Go out and buy a cheap weber kettle or something is what I would do and leave the lang alone.

post #3 of 5
Thread Starter 

I have a grill, but this thing is like 5 feet long. I can grill up for a party. That is what I am wanting to do.

 

I am not sure what a turnign plate is, its just hollow down below. I was just wondering if putting coals down there would ruin it?

post #4 of 5

A couple things come to mind looking at that picture.First is what kind of smoker is that do you know who built it? I see a bottle under the smoker is that to catch drippings is there a pipe extending down towards it?

post #5 of 5

It looks like a reverse flow smoker. Hopefully that bottom plate is thick enough to withstand the heat generated by the coals. If it is, then I guess you can if you can plug the drain hole on the bottom plate and keep coals from falling off the side and into the lower chamber (if that is what it is called),


Edited by harryho - 6/10/10 at 7:57pm
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Beef
SmokingMeatForums.com › Forums › Smoking Meat (and other things) › Beef › Putting coals below the rack?