or Connect
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoking Gadgets and Tools.  › blade for rival grind-o-matic
New Posts  All Forums:Forum Nav:

blade for rival grind-o-matic

post #1 of 17
Thread Starter 
I have a old grinder here that my dad gave me we used to use it alot when i was a kid but somehow the blade got lost does anyone know where to get them it is a rival grind-o-matic 2100 thanks
post #2 of 17
Do you have a picture of the grinder, I may have one...
post #3 of 17
Thread Starter 
http://kitchen.manualsonline.com/mim...a7277974.pjpeg here is a pic of the manual i can post a pic of the actual grinder itself if this wont work have to go get it thanks
post #4 of 17
Are you needing the grinding plate or the cutter blade? If you have a grinder plate give me the measurement of it or the diameter of the opening it fits in...
post #5 of 17
Thread Starter 
i need the cutting blade the measurement is 2 1/16 in side the housing
post #6 of 17
One more question, does it have a 7/16" or 1/2" square hole?
post #7 of 17
Thread Starter 
ok the square on the end of worm where the cutting blade would go is closer to 5/16
post #8 of 17
Let me do some digging and see what I can find in my junk parts drawer. I have been collecting meat grinders for years and never through away a part I may need.
post #9 of 17
Thread Starter 
thank you very much your help is much appreciated
post #10 of 17
I don't have any that small, however I did a little research and I believe that one from an Oster unit is the same... I have a working Oster and I checked the blade and plates, they measure the same.

I found this on ebay you might check it out...
http://cgi.ebay.com/Oster-Kitchen-Ce...d=p3286.c0.m14

http://cgi.ebay.com/OSTER-KITCHEN-CE...d=p3286.c0.m14

http://shop.ebay.com/?_from=R40&_trk...All-Categories

Let me know if you need more help... PDT_Armataz_01_34.gif
post #11 of 17
Thread Starter 
Thank you very much for your help.It is greatly appreciated.I will order the oster blade and let you know if it works thanks again.
post #12 of 17
Glad to have been of some help... Good luck. PDT_Armataz_01_34.gif
post #13 of 17
Here is a link that have always found the parts I have needed for small appliances
www.TheGourmetDepotCo.com
This one used to be culinary parts warehouse
Good luck
post #14 of 17
Thread Starter 
I know this is a old post but figured id report back the blade did work will be grinding some pork up for some kielbasa this weekend
post #15 of 17
Was it the one for the Oster or a different one?
post #16 of 17
Thread Starter 
yeah the oster the one that you linked me too thanks again
post #17 of 17

Just found a Grind O Mat at a thrift store.

It is missing the ring collar that holds the grinding blades in.

Any idea where I might be able to find one?

Thanks!

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Smoking Gadgets and Tools.
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoking Gadgets and Tools.  › blade for rival grind-o-matic