or Connect
New Posts  All Forums:Forum Nav:

The Wu-DS - Page 2

post #21 of 31
Good job on the build. It looks and works pretty good!
post #22 of 31
Have to say that is the baddest looking UDS I've ever seen. Your Wutang Shield gets points alone. I am impressed with the effort and workmanship you put into making it..that is awesome. The hobo touch, and the fattie "check-ride" sealed the deal. You are a professional! Hat's off to you and may the TBS follow you wherever you go.

post #23 of 31
It had to be harder than that!

points.gif for the narrative.
post #24 of 31
beautiful built,splendidPDT_Armataz_01_37.gif
nice logo PDT_Armataz_01_34.gif
post #25 of 31
Thread Starter 
Thanks guys. This UDS has seen action almost every weekend since it was built. Since this thread was started I have added a 2nd thermo just below the lower grate and I lengthened the intake covers slightly. It works great!!
post #26 of 31
Great build! You make it look and sound so simple. Maybe one day I'll tackle one of these....

post #27 of 31
After cutting out the lid how did you get such a smooth edge around the top? I am about to use a skillsaw to cut out my top and get to working on my UDS!!!
post #28 of 31
Thread Starter 
I used a chisel to start a small hole at the edge of the top then used a reciprocating saw to cut out the lid from the top. This left the upper ridge/seam intact. It left behind a lip that stuck out about 1/4 inch (a little more in some spots) that I just hammered down flat.

Let me know if that doesn't make sense.
post #29 of 31
That is perfect, thanks!
post #30 of 31
how do you regulate temps to smoke at lets say 225? Or what is the best way to regulate the temps?
post #31 of 31
Thread Starter 
You regulate temps by controlling the air intakes. Less air for a lower temp, more air for a higher temp. My drum likes to run at about 240-250 but I have made it run closer to 225. I have also let it run over 350 when crisping up the skin on chicken or baking bread in the smoker.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: UDS Builds