or Connect
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Electric Smokers › Cart Modification for MES. Nice!
New Posts  All Forums:Forum Nav:

Cart Modification for MES. Nice! - Page 6

post #101 of 109

first post. Did my first smoke on a mes30 about a week ago. I found this cart at amazon. Seems to be same thing. For people like me without a sams club.

 

http://www.amazon.com/Seville-Classics-Heavy-Duty-Commercial-Grade-Utility/dp/B003673GBY/ref=sr_1_10?s=office-products&ie=UTF8&qid=1420428132&sr=1-10

 

dimensions seem the same. Too bad its almost 20 bucks more.

post #102 of 109

I actually had one of those chrome racks in my garage not really using it to it's best capability so I made the switch today, since I am over 6' I decided to put it on the top shelf, as you can see I had to remove the wheels. Plan to put some sort of pan under it as a grease backup and also try to find a way to bolt it to the cart even if it is by getting 4 longer screws with big flat washers and going up between the mesh grate into where the wheels were screwed into the cabinet, anything to keep it from falling one way or the other.

 

2nd and 3rd shelves will be stocked with wood chips, gloves, meat thermometers, small extension cord (10') etc. All covered up for the week.:grilling_smilie:

Regards,

Todd

MES 40", AMNS

post #103 of 109

I know it's not electric, but I here is my Masterbuilt cart mod. It's mounted to the cart with 1" aluminum block. There is a square cutout in the center of the middle shelf for the burner. And we used aluminum angle on the ends of the top shelves.

Thanks to Pignlt for the great idea!

 

 

!

post #104 of 109

Has anyone used the third shelf/rack to hold a mailbox mod - or would the dimensions and placement for that even work?

post #105 of 109

Great Job, you have my wheels turning. .

post #106 of 109
Your cart setup looks great. I have the cold smoke attachment as well. Please provide details on the technical aspect of the elongated shelf holding the cold smoke. What is the cover material etc. thanks
post #107 of 109
Quote:
Originally Posted by smoking4fun View Post
 

Has anyone used the third shelf/rack to hold a mailbox mod - or would the dimensions and placement for that even work?

It would work you would just need to place it in the right spot, I take it you are talking about the 3rd shelf (1/2 shelf) Just place it low enough that the smoke will raise up to the MES

 

Good luck and let us know.

 

DS

post #108 of 109

I am building a cart from scratch. I have a shelf on the bottom for my cold smoker kit. It is still in progress, will show pictures when complete.

post #109 of 109
Quote:
Originally Posted by craigdchang View Post
 

I am building a cart from scratch. I have a shelf on the bottom for my cold smoker kit. It is still in progress, will show pictures when complete.

Thumbs Up

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Electric Smokers
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Electric Smokers › Cart Modification for MES. Nice!