Wood Burning question

nick

Meat Mopper

Original poster

Apr 28, 2008

234

10

Louisiana

• Jun 16, 2008

• #1

I have a homemade smoker out of 2 -55 gallon drums....bottom drum is the fire box, top drum is the smoker. I build the fire in the bottom drum, light it, and let it burn for 45 minutes or so till I have a consistant heat/temp going, and then fill the smoker. I read Jeff's post about "true wood smoking". I don't have a burn barrel built yet.......In the mean time, when my temps start to drop down, I add a split log or two to the firebox. Is it ok to do this with my setup and not get too many nasties from the initial combustion process? I am using split logs for the entire smoke..(pecan, cherry, and or hickory.)
I've done 2 smokes already and everything seemed good...no numbness in the mouth or bitter tasting food, but like I said, I'm a rookie at this.
Any input is appreciated.
Thanks!

 

pineywoods

SMF Hall of Fame Pitmaster

Staff member

Administrator

OTBS Member

SMF Premier Member

OTBS Admin

Group Lead

Mar 22, 2008

28,851

3,940

Florida

• Jun 16, 2008

• #2

Nick lots of people do it just the way you do. At the same time tho pre burning would also give you better temp control by not getting that flare up when they are getting started as well as the extra smoke

 

tn_bbq

Smoking Fanatic

Jun 2, 2008

599

11

East Tennessee

• Jun 16, 2008

• #3

Sounds like it's working for you. Keep doing what works.

BTW, that's a neat smoker.

 

richtee

Epic Pitmaster

OTBS Member

Aug 12, 2007

10,682

29

N. Oakland County, MI

• Jun 16, 2008

• #4

I'd characterize that as a "larger sized pit" and would think you could get away with a split or two during smoking without a pre-burn... seems you have enough airflow and a good hot coal bed to allow this.

An indication of poor combustion will be a heavy buildup of creosote or black carbon buildup in the chimney or smoker body.

 

nick

Meat Mopper

Original poster

Thread starter

Apr 28, 2008

234

10

Louisiana

• Jun 16, 2008

• #5

Thanks to all who replied. Rich, I was hoping you'd reply too. When I add the split log, I get a short flare up and a whiter looking smoke but only for a couple minutes, then back to the thin blue. I just wanted to make sure that the couple minutes of the non blue smoke wasn't hurting me.
Thanks.