or Connect
New Posts  All Forums:Forum Nav:

Lang mobile 60

post #1 of 18
Thread Starter 
I am going to pick up a used lang mobile 60. I am worried about the tires on the trailer during the trip home. Can anyone tell me the tire size and lug pattern.

Thanks guys,

P.S. Does anyone know what the axle size Lang uses. I want to get some bearing buddies for the ride back.
post #2 of 18
I don't have a LangPDT_Armataz_01_19.gif but you might call the owner and find the tire size and whether it's a 4 bolt or 5 bolt rim. Most trailer rims are pretty standard. Once you find out go to Lowes and get a tire and rim assembly, if you make it home without using it return it and the go to a tire store and get a couple of new tires on your rims. Please check the air and air them to the max inflation thats on the side of the tire, you will have less problems if you do that

On edit Langs phone # is 800-462-4629
post #3 of 18
PM "Bud's BBQ", he has a Lang 60 and is intimate with it. icon_mrgreen.gif
post #4 of 18
sorry mike........i JUST couldn't let it pass

just how "INTIMATE" IS he with his smoker

wink wink, nudge nudge

post #5 of 18
Enuff to get it all hot n smokey
post #6 of 18
Yes but is it "Thin Blue Smoke"PDT_Armataz_01_11.gif
post #7 of 18
You boys are soooooooooo bad! PDT_Armataz_01_27.gif
post #8 of 18
i bet bubba knows the specs better...icon_eek.gificon_razz.gif
post #9 of 18
Thread Starter 
You guys are so silly. Can anyone help?
post #10 of 18
Hey, I'm dead serious about you PM'ing Bud. He really has a Lang and is intimate with it. cool.gif
Let's just say he knows his Lang. It produces pretty good ribs too.
post #11 of 18
it really do- i ate those ribs & i've seen bud tend that thing in 115f heat.....2 words, dedicated & committed.... he knows that pit & works wonders w/ it..
post #12 of 18
Thread Starter 

Cancel all requests

I called Ben Lang. What a cool cat. He was in a hurry and still gave me the 5 minutes I needed. If anyone is interested the trailer tire is a 13in 5 lug, the bearings are 1 inch and the outer diameter of the hub is 2 inches. The hitch is a 2 in ball. Just in case anyone else runs into that problem.

post #13 of 18
Thread Starter 

Got It

Well I went to Charlston and bought my used LM60. This thing rocks!! It has little to no rust on it and has been cooked on a ton. The only problem is a busted weld in the grease channel over the firebox. I will weld it in a day or so. I put 15 lbs of Boston Butt on it and they were great. This is really a great cooker. You have to add a small log every hour or so to maintain 225. Every so often you may have to add two to get the base coals built up again. This thing also pulls like a dream. My little 4 cyl toyota dosen't even know it's back there. More to come.
post #14 of 18
way kewl justin.........congrats..............wasn't as bad as you thought it mite be.........

post #15 of 18
Thread Starter 

This thing was only pulled a few hundred miles. I just installed some bearing buddies, greased them up and pulled the thing back to Atlanta.
post #16 of 18
I have yet to experience the Lang, but from all I hear/read, it's a peach of a pit.

Oh..HA! peach...pit...hahaha!

I kill me! PDT_Armataz_01_11.gif
post #17 of 18
That's awesome Justin! PDT_Armataz_01_34.gif One of these days, I'll be towing one around also...

Good luck with it and show us some pics!
post #18 of 18
Thread Starter 
I will do a thread on the restoration process soon.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Wood Smokers