New Posts  All Forums:Forum Nav:

Abt Holder

post #1 of 11
Thread Starter 
Here's a ABT holder I made out of a piece of aluminum about 7/8 thick 5"x12" The legs are piece's of the strips for hold up a dropped ceiling. The holes are 7/8". I mess up one row of holes so it'll only hold 24.
post #2 of 11
Are you right on the thickness, it looks thinner in the pic, great idea though
post #3 of 11
Thread Starter 
Yepper I'm right about the thickness 1/8" thick.
post #4 of 11
I only questioned because your original post said 7/8" thick, I agree with the 1/8" and will make one, thanks for the idea
post #5 of 11
On another forum somebody suggested poking holes in an upside down tin foil disposable muffin/cupcake pan. Great idea. D'oh!
post #6 of 11
That's a great little rack Smokin,thanks for sharing !!PDT_Armataz_01_34.gif
post #7 of 11
BJ's has these little stainless racks full of holes tonight about 18" x 14" for $4.90. I bought one. I'm going to expand about 25 of the holes for ABTs and leave the rest just for smoke. I think it'll be a great meatloaf or mushroom pan too.

inches Opps!
post #8 of 11
18 ft ??? should i get another pit & weld the 3 together ???? lol
post #9 of 11
here is pics of my rack i made at work. i took a piece of 1/8" thick steel plate, and made it 12" x 8". i punched 1" holes in it. it holds 35 peppers.
post #10 of 11
A few years ago I had some left over expanded metal I cut to size picked up 4 stainless bolt and 8 each stainless bolt and washers. Used the bolts for legs locking them inplace with nuts and washers, the rack is still going strong.
post #11 of 11
Very good ideas looks like I will have to go make me one now.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Fruit, Nuts & Vegetables