or Connect
New Posts  All Forums:Forum Nav:

I'm baffled...

post #1 of 11
Thread Starter 
icon_mrgreen.gif I found myself in tinker mode again this weekend (imagine that...), so I decided to play with my CharGriller... It now has a baffle installed!

Next on the menu is gonna be two rails; one at the back and one at the front, just above the lower edge of the baffle. These will be for "tuning" plates.

Can't wait to fire it up!!
post #2 of 11
Looks like it should work.
Let us know.
post #3 of 11
Looks good Hawg! I'm no expert but I've seem a few of them
post #4 of 11
Thread Starter 

The finished product...

...for now. biggrin.gif

I installed rails for the plates to sit on, the plates can be moved/removed to tune the heat. I think this should work well... PDT_Armataz_01_23.gif I'll keep y'all posted!
post #5 of 11
Looks like you've got that puppy fine tuned already! Good luck
post #6 of 11
I think those are gonna work just fine. PDT_Armataz_01_37.gif
post #7 of 11
Looks good, HH. I'm curious as to whether that's gonna use more charcoal. Let me know, will ya? I'm trying to figure out a way to capture more of the heat I see going out the top of the firebox, so I can use less charcoal.
post #8 of 11
Looks like that will work Hawg. how much space is between the grates and the plates?
post #9 of 11
Thread Starter 
I'm guessing here... probably about 8 to 10 inches...? I didn't measure it.
post #10 of 11
Nice mod! let us know how it works!
post #11 of 11
Thread Starter 
Originally, I guessed it to be about 8 to 10 inches... NOT. I just measured it (just before the skies opened up... man, it's POURING here!) and it is more like 6 inches. I'll be firing it up this week to see how it all works.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Charcoal Smokers