Leg Kits

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

stephan28

Fire Starter
Original poster
Jun 9, 2017
60
10
Do any of the Masterbuilt leg kits/stands accommodate the wheels like I have on my MES 20070311 unit? I'd like the addition height but I also want mobility.
 
Wheels are built in the rear legs.
-Kurt

Ok, as the smoker sits now it has wheels on the back.

I am wondering if any of the risers/leg extensions etc would allow me to bolt the wheels onto them to retain the mobility that the smoker already has. Otherwise adding the risers/leg extensions removes the mobility since I don't see any risers/leg extension kits that come with wheels.
 
Last edited:
Ok, as the smoker sits now it has wheels on the back.

I am wondering if any of the risers/leg extensions etc would allow me to bolt the wheels onto them to retain the mobility that the smoker already has. Otherwise adding the risers/leg extensions removes the mobility since I don't see any risers/leg extension kits that come with wheels.
When MB sent me the leg kit for the 20070311 the wheels are permanently attached to the rear legs of the kit.  You remove the front feet of the smoker and the wheels that came with the smoker to install the leg kit.  So you'll have the original wheels that came with the smoker you installed as spares and the front feet.

-Kurt
 
This pic shows my smoker with the original wheels and my other smoker next to it with the legs on it that have the permanent wheels built into the back legs,  You may have to zoom in.


-Kurt
 
Kurt,

Thanks. I had no idea that you could swap the wheels/feet from the unit to the leg kit. On their website it doesn't mention anything about that. I figured if it was possible that they would advertise that fact. Good to know though! Thanks!
 
Kurt,

Thanks. I had no idea that you could swap the wheels/feet from the unit to the leg kit. On their website it doesn't mention anything about that. I figured if it was possible that they would advertise that fact. Good to know though! Thanks!
The leg kit for the 20070311 does come with wheels that are half hidden unlike the wheels that come with the smoker that stick out .  I sent you a PM.

-Kurt
 
 
The leg kit for the 20070311 does come with wheels that are half hidden unlike the wheels that come with the smoker that stick out .  I sent you a PM.

-Kurt
Thanks! Awesome. I ordered the leg extension kit! The added height plus wheels will be perfect.

Funny, I still don't have a functioning smoker, but I have the AMZNPS, the mats for inside the smoker, a cover, plenty of wood chips/pellets and the leg kit on the way!
 
Last edited:
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Clicky