OK Joe help

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

andrewsc92

Newbie
Original poster
Jun 21, 2017
3
10
Las Vegas,NV
Hello,

So I recently bought an OK Joe Highland smoker. After I received the smoker, I've noticed that the logo plate that has the serial number broke. I tried re-attaching the studs with the clips but then I realized the studs had broke in half so it's too short. Any suggestions please ?
 
I am guessing they used tap in rivets? If so just drill them out with a 1/8" drill bit and get some 1/8" rivets to re-attach the plate.

Other than that I would need to see a pic because I am just guessing on what the situation is.
 
return it to the store. Usually those hold. Should be able to exchange it. If you dont want to go through the hassle then just drill it through and bolt it back on.
 
just throw it away and bolt the holes....why worry about something as worthless as a brand plate? Now lets get to smoking!
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.
Clicky