Catering for 125 people, looking for some advice

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

soul-q

Newbie
Original poster
Oct 12, 2015
25
11
Hello to all members,

Sorry this will be wordy, but I want to give as much detail as possible. I have my first large catering event coming up in less than a week, I'll be doing 2 large 16-18lb briskets, 2 bone-in butts about 10lbs each, and about 15 chickens in the smoker. I'll also be doing a vegetarian option of smoked eggplant with a light vinaigrette sauce.

I'm pretty versed at smoking, but this is a big corporate event and definitely the most I've ever cooked for at once. My questions are mainly related to transporting the food while keeping it hot so that when I put it in the chaffing dishes it'll be ready to go. The plan is to cut the briskets at the event, just before the line starts to maintain moisture and when one is gone I'll get the second out to cut, the pork I'm going to pull prior to leaving my kitchen, and the chickens I need to cut apart before leaving my kitchen as well. I have a 3-4 foot tall Cambro warmer (not sure of exact height) and two large coolers. I plan to rent the chaffing dishes and another slightly smaller Cambro warmer to use to transport as well.

Let's assume a lunch time of noon, and I'd like the briskets to be done at least 4 hours before that so they can rest in the Cambro. I know I need to keep the internal above 140. I'm hoping to hear some advice from others who have done a large order like this that then must be transported to a different location, and then cut and served. I plan to heat up the Cambro first with hot water before putting in the briskets. Does anyone have a ballpark idea of how long they can sit in a Cambro before going down below 140? I was not planning on using a chaffing dish for the brisket nor a heatlamp, just expecting it to go to plates pretty quickly once the line starts.

For the pork, well this is much easier than brisket, but also I don't want to lose too much heat once it's pulled and placed back in the Cambro to when it's served. I'll also have chaffing dishes to add heat to this once setup on site. I typically rest the pork as well a couple of hours. Any advice on this process to ensure top quality up to buffet time?

The chicken is trickier. I believe it'll smoke best whole, then cut up into pieces, bone-in, and transported to location in the Cambro. Once there and the chaffing dishes are steaming, I'll put that into the chaffing dish and cover with the lid. I have a feeling I'll have at least 2-3 trays of chicken due to the amount so I'll just keep pulling out of the Cambro and into the chaffing dish when needed. If anyone has any tips on how best to do this please do advise. Also, is there a best practice on separating the chickens into 6 or 8 pieces, and is it best to cut apart after it's smoked?

Last, anyone ever smoke eggplant? I love grilled eggplant and fried eggplant, but haven't yet smoked it. I'm planning a dry run this weekend to test it, but if anyone has any thoughts on how best to do this please share. My plan was to halve it lengthwise, cover in olive oil and some salt and then smoke. The recipe I sourced says to smoke for 1 hr or until tender but no temperature was listed. I also read some conflicting threads on the skin, some saying to peel it and others saying to leave it on. Any thoughts? Once it's done, I'll slice each half into 1/2 inch cuts and place in the chaffing dish. I'm thinking this should be one of the last things to smoke so it doesn't wilt on me, but again, if you have any thoughts please share it!

One last thought, about 22-24 lbs of brisket, about 15-17 lbs of pulled pork, and 14-15 chickens cut apart/bone-in plus other sides should feed 125 people at a corporate lunch? Definitely don't want to run out of food... 

Thanks in advance!

Alston
 
SoulQ - Experienced answerers will want to know your location to have a sense of temps during  transporting your food, etc.

What temp weather do you expect, how long to transport, in preheated vehicle or dead cold, etc

Any re heating appliances at your serving locations, or just sterno?

And just my thought - Should there also be a non smoked main course offering for the not smoked folks?

Like maybe plain baked skinless breasts that people seem to like (hell if I know why, but they sure seem to)     Marc
 
Last edited:
Why whole chickens? I've found it best to use thighs, shredded for large groups. Cut up whole birds usually yields a ton of waste as there are lots of parts people won't eat.

I'd do the pulled pork a day or two in advance and reheat the day of.

As for transporting you mention being done four hours in advance and then into the Cambo. That should be doable to maintain the proper temp.

One last note you may want to re-visit the amounts of meat you are prepping. Seems a bit light for the size of group.
 
Cambros will hold temps for a lone time provided they are set up right as stated your area and weather will play a large part in this. Not always the correct amount like for my family you better do more but a good rule of thumb is 1/4 lb finished meat per person. wish you success with this project.

Warren
 
Marctrees, thanks I did forget that info, I'm in Los Angeles and the temp both day before and day of is high if 67-70 and lows of 49-52. The trip to the location will take about 30 minutes, max of 45. Transporting in a van that can be warmed up also. There is a single consumer sized oven at the location that I could utilize as well.

Dirtsailer2003 - I am concerned about that as well. I calculate I should have around 65-70 lbs of meat altogether, plus the eggplant course for vegetarians and then the sides. It is for Nike so the organizer has told me it'll be a leaner more health conscious group. I had thought to maybe do 3 smaller briskets instead of two larger ones to be safe, but right now it's about 1/2 pound per person. Also it's a lunch business meeting so I feel like there won't be as many binge eaters since they have to go back to work as it's a Tuesday. Am I under here? I would start with 50 lbs whole chickens, 20 lbs pork butt bone-in, and 30-32 lbs of brisket before cooking...

The event organizers want it to be fork and knife, so I'm probably going to pull the chicken too instead of serving it bone-in.

Halfsmoked - it will be close to 70 degrees when transporting and cooking, but night before will drop to about 49 degrees.
 
Marctrees, thanks I did forget that info, I'm in Los Angeles and the temp both day before and day of is high if 67-70 and lows of 49-52. The trip to the location will take about 30 minutes, max of 45. Transporting in a van that can be warmed up also. There is a single consumer sized oven at the location that I could utilize as well.

Dirtsailer2003 - I am concerned about that as well. I calculate I should have around 65-70 lbs of meat altogether, plus the eggplant course for vegetarians and then the sides. It is for Nike so the organizer has told me it'll be a leaner more health conscious group. I had thought to maybe do 3 smaller briskets instead of two larger ones to be safe, but right now it's about 1/2 pound per person. Also it's a lunch business meeting so I feel like there won't be as many binge eaters since they have to go back to work as it's a Tuesday. Am I under here? I would start with 50 lbs whole chickens, 20 lbs pork butt bone-in, and 30-32 lbs of brisket before cooking...

The event organizers want it to be fork and knife, so I'm probably going to pull the chicken too instead of serving it bone-in.

Halfsmoked - it will be close to 70 degrees when transporting and cooking, but night before will drop to about 49 degrees.
If you are going to pull the chicken go for skinless boneless thighs. Way less waste and price per pound will work out better than whole birds. I did whole chicken once and that was a mistake.

When doing multiple meats its always hard to decipher the correct amount of each one. Are you serving or is it a grab a plate and serve yourself venue? I am feeding 100 later this year, chicken and pulled pork. I plan on (6) 8-10 pound butts, 30 pounds (non-cooked weight) of skinless boneless thighs. Plus there will be sides. The chicken will be chopped, not pulled as I find its quicker to chop it up.
 
20 pounds of pork is your starting weight. You'll lose 40% or more while smoking it.
 
18 pound briskets will lose a few pounds of weight after trimming and a lot more after smoking as well.
 
I don't smoke while chickens so I don't know enough about the loss but I'll assume your using mass market, store bought chickens and those are pumped full of water so your gonna lose a lot there to.

I'd revisit the quantity planning stage and account for loss somewhere in the range of 35-40% to be safe. Hate to run out of food. Worst that happens is you have extra. Always better to have to much.
 
Hillbillyrkstr - I get my meat from restaurant depot so it's a little better quality than most grocery stores, in my opinion. I do want to have light meat too in it so I couldn't do just the thighs. They did request more chicken than brisket or pork, so how much more weight in raw chicken do you think I should add on top of the 50 lbs?
 
Btw, I've read that a whole chicken yields about 60% meat vs carcass.
 
I did a 16 and 18 pound brisket last year for 70 people along with and extra 25 pounds of point that I made into burnt ends, and 20 pounds of pork butt (starting weight).

All the brisket was gone, had some left over Pork and it was a fattie contest where 20 fatties were entered and all those were gone as well.

Hope that helps a bit. Good luck.
 
Btw, I've read that a whole chicken yields about 60% meat vs carcass.
If you really pick at it or boil the carcass down. And your yield is going to be primarily dark meat.

If you really need white meat, then do all chicken breasts. Yes you can pull or chop chicken breast too. They aren't as forgiving as thighs so you really need to pull of the smoker at 160° and let the carry over finish them. You could also consider a 50/50 mix of thighs and breasts.
 
Pardon my ignorance, but what do you mean by a fattie contest?

Lol, my autocorrect changed "fattie" to Carrie. That's an unfortunate autocorrect for the ladies named Carrie.
 
Guys thank you for all the advice, I really appreciate it! So if I were to add another 15-20 lbs of chicken, which they want more chicken than pork or brisket, I should be ok I'm thinking?

@hillbillyrkstr  - that fattie event sounds like an awesome time! That's something I'd love to experience at some point.
 
For pulled chicken I usually use 70% dark meat and 30% white. Some use a 60-40 mix...I use boneless skinless thighs and breasts.
I know you mention they wanted mostly chicken but I would bet the brisket won't last long.
A 8-9 lb butt will yield about one 1/2 pan of pulled pork usually.

Good Luck!
 
hardcookin - thanks for that ratio, out of curiosity where do you source your meat from for the best price when doing pulled chicken? I've only smoked whole bone-in chickens before, when you do the thighs and breasts that are boneless do you still go 275-300 degrees or do you lower it since you don't worry about crisping the skin?

About how long does it take and what temp do you do these? 

Just found out I can get boneless breasts, thighs, and legs from my supplier, so if I do use boneless/skinless chicken, how much do you get from the total weight? If I have 60lbs will it cook to just a little under due to moisture loss?
 
Last edited:
hardcookin - thanks for that ratio, out of curiosity where do you source your meat from for the best price when doing pulled chicken? I've only smoked whole bone-in chickens before, when you do the thighs and breasts that are boneless do you still go 275-300 degrees or do you lower it since you don't worry about crisping the skin?

About how long does it take and what temp do you do these? 

Just found out I can get boneless breasts, thighs, and legs from my supplier, so if I do use boneless/skinless chicken, how much do you get from the total weight? If I have 60lbs will it cook to just a little under due to moisture loss?
Boneless skinless I brine the chicken , And I usually smoke it at 275-300 and it takes around an hour. Keep in mind every smoker is different.
I'm not sure what the yield is, I should have kept better notes but the last time I done PC it was pouring rain that morning and I had my hands full.

I done a full pan of pulled chicken, full pan of baked beans and a full pan of pulled pork that day.

My meats it all depends, sometimes on sale and other times from a distributor. Like now my local Wegmans has pork butts on sale for $.99 lb.
And I will load up my freezer.I can't even buy pork butts by the case at that price.
 
Last edited:
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Clicky