16' walk on trailer build

  • Some of the links on this forum allow SMF, at no cost to you, to earn a small commission when you click through and make a purchase. Let me know if you have any questions about this.
SMF is reader-supported. When you buy through links on our site, we may earn an affiliate commission.

kpardue24

Newbie
Original poster
Nov 2, 2016
10
10
Hello all,

This is my first BBQ forum and first post. I recently acquired a 16' trailer with two 3500 lb axles. Have removed the 2" x 8" x 16' boards to replace and beef up the damaged angle iron underneath. My goal is to build a reverse flow smoker and to frame the trailer with 2" x 3/16 metal tubing and install a roof. My questions are:
1. Do I weld / bolt smoker to frame or the new floor?
2. Do I have the right idea for material type when it comes to building the frame?
 
SmokingMeatForums.com is reader supported and as an Amazon Associate, we may earn commissions from qualifying purchases.

Latest posts

Hot Threads

Clicky