or Connect
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › Smoke Houses › Need some suggestions
New Posts  All Forums:Forum Nav:

Need some suggestions

post #1 of 4
Thread Starter 
Hey y'all! Finally after 10 years I decided it was time to upgrade and build a bigger smokehouse. I went from 2X2 and 9' tall fired with a 15,000BTU PROPANE BURNER TO A 3X3 and 7' tall fires with a 30,000BTU double propane burner. I'm including some picks of the new smoker.

I'm having some temp issues. Particularly cold spots. I get good heat in the back and on the right side, but the left side is cold and so is the front. Looking for some tips on how to get more even heating....[IMG][IMG][IMG]
post #2 of 4
Nice smoke house. You might want to try putting a piece of steel above your heat source. Make it 6" smaller than your smoker heat should radiate up more evenly.Cant hurt to try!
post #3 of 4

Where are the inlets and exhausts located ??   Got pics...

post #4 of 4
Thread Starter 
Quote:
Originally Posted by Wayne Gray View Post

Nice smoke house. You might want to try putting a piece of steel above your heat source. Make it 6" smaller than your smoker heat should radiate up more evenly.Cant hurt to try!
I was thinking maybe suspending a steel fan above the fire too. Maybe that would cause the air to move more evenly?


Sent from my iPhone using Tapatalk
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Smoke Houses
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › Smoke Houses › Need some suggestions