or Connect
SmokingMeatForums.com › Forums › Announcements › Roll Call › Mattie I'm new to the forum.
New Posts  All Forums:Forum Nav:

Mattie I'm new to the forum.

post #1 of 6
Thread Starter 
I am a retired school teacher been smoking meat a few years with electric smoker wanting to build a vertical insulated reverse flow cabinet smoker trying to figure all that I need to know about it.
post #2 of 6

Hello Mattie  :welcome1:  to you.

Glad you decided to join us on this great site.

You've got questions, there are very knowledgeable

folks here.

The best part is they are all willing to share that knowledge.

Ask, you'll get answers.

Have fun and remember pictures of your smokes are good things.

 

      Ed

post #3 of 6
Thread Starter 
Thanks I have not figured out on an insulated reverse flow cabinet smoker does the heat -smoke go between or through the insulation up the side and back walls over into the cooking chamber?
post #4 of 6

Hey Mattie, I said there were lots of knowledgeable 

folks here.

I didn't say I was one of them.  :biggrin:

I am a wattburner myself and truly don't know a thing

about any of the other types of smokers.

What you need to do is right up on top of this page

punch up the forums button.

Go right down the list and you will come to smoker builds

go down that about halfway down will be the reverse flow builds.

Jump in there and ask, you will get answers from folks who 

know what they're talking about.

Have FUN.

 

    Ed

post #5 of 6
Thread Starter 
Wanting to build a insulated vertical cabinet smoker reverse flow but need plans or clarification on how the heat and smoke gets through insulation up the dude walls and back wall?
post #6 of 6

Welcome to SMF, Mattie!

 

For your questions on a RF smoker, if you follow this link & post them there you will get your answers.

 

http://www.smokingmeatforums.com/f/201/reverse-flow

 

Al

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Roll Call
SmokingMeatForums.com › Forums › Announcements › Roll Call › Mattie I'm new to the forum.