or Connect
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › Brick Smokers  › Cast iron doors, vents, etc.
New Posts  All Forums:Forum Nav:

Cast iron doors, vents, etc.

post #1 of 2
Thread Starter 

Is there a source for these items? I'm planning a concrete block/wood smoker. Thanks, Bill

post #2 of 2

You might try a online search for wood stove supplies and parts. Replacement doors for particular models (look for the size, shape, style you like), pipes, dampers, etc should all be available online and locally in many areas. Many home centers carry wood stove and fireplace kits, door gasket materials, etc. You may need to be a little creative for intake draft controls, as they'll need to be home-made, or, manufactured OEM parts which will require being attached to your firebox per their specs.

 

A simple intake air control is a stud welded to a steel face with 4 holes around the stud in a cross-orientation. Weld a round disc or large washer to a nut (nut on outside when mounted) with a hole for the stud to pass through...spin onto stud. To open, turn the disc left-hand, to close, turn the disc right-hand...clearance between the disc and firebox face controls the air flow...easy, effective and infinite adjustment.

 

 

Eric

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Brick Smokers
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › Brick Smokers  › Cast iron doors, vents, etc.