or Connect
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › UDS Builds › Advice on best way to go with this barrel
New Posts  All Forums:Forum Nav:

Advice on best way to go with this barrel

post #1 of 4
Thread Starter 

I have a UDS and had to burn and scrape and sand etc. to get the liner out. WOW 

I have a barrel and to make another. The inside does not look the same as the one before.Take a look at the lid and tell me the best way to get this copper colored coating off. I scratched it so you can see the bare metal. It's won't wipe off. Thanks

post #2 of 4

Hello.  Welcome.  I see this is your first post.  Please take some time and swing over to Roll Call and introduce yourself so that we may give you a proper "Hello".  All info you can provide us with such as smoker type, location and so on will help us answer any questions you may have, and pictures help a bunch.  As for your question: you have the answer.  "I have a UDS and had to burn and scrape and sand etc. to get the liner out. WOW".  Have fun.  Good luck.  :icon_biggrin:

Glad to have you with us.  Keep Smokin!

Danny

post #3 of 4
Thread Starter 
Quote:
Originally Posted by KC5TPY View Post
 

Hello.  Welcome.  I see this is your first post.  Please take some time and swing over to Roll Call and introduce yourself so that we may give you a proper "Hello".  All info you can provide us with such as smoker type, location and so on will help us answer any questions you may have, and pictures help a bunch.  As for your question: you have the answer.  "I have a UDS and had to burn and scrape and sand etc. to get the liner out. WOW".  Have fun.  Good luck.  :icon_biggrin:

Glad to have you with us.  Keep Smokin!

Danny

OK Danny, Thanks. I updated my profile and added a sig. I 've been a member since 15 and today was first post.

I think it's some kind of rust inhibitor inside the barrel. My first UDS had a liner and I worked to hard to remove it. I was hoping for an easier way.

post #4 of 4
Thread Starter 

I discovered it's rust inhibitor. I will still have to get rid if it. I am going to wire brush and machine sand the paint outside and inhibitor inside. I burned the first out and worked harder getting the black mess off. Thanks for the help.

New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: UDS Builds
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Smoker Builds › UDS Builds › Advice on best way to go with this barrel