or Connect
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Propane Smokers › Low Flame in burner
New Posts  All Forums:Forum Nav:

Low Flame in burner

post #1 of 2
Thread Starter 
I recently tried to use my masterbuilt porpane smoker . When starting it I noticed that the flame was low and I could not build any heat. I turned it off ,took out burner and blew it out with an air compressor to make sure I did not have any cob webs blocking the flow. This still did not fix the problem , the best temp I could get was about 175. I have changed tanks with the new one being just refilled. Still no better than 200. Could this be a pressure regulator problem or what
post #2 of 2
I had this issue one. It was the metal mesh screen in the regulator. It had built up moisture and rusted so I wasn't getting proper flow to the burner.

Call masterbult and they might send you a new regulator or have other things for you to try.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Propane Smokers
SmokingMeatForums.com › Forums › Smoking Supplies & Equipment › Propane Smokers › Low Flame in burner