or Connect
SmokingMeatForums.com › Forums › Announcements › Roll Call › Preparing for a reverse flow smoker build in Wisconsin.
New Posts  All Forums:Forum Nav:

Preparing for a reverse flow smoker build in Wisconsin.

post #1 of 7
Thread Starter 
Just picked up a 7ft long air compressor tank. This will be my first build so any advice would be welcome.
Thanks in advance.
post #2 of 7

:welcome1:  to SMF!

 

Glad to have you aboard!

 

Al

post #3 of 7

Welcome to the site.  Try the search tool and look for rf builds.  Lots of folks here with experience.  Glad you joined us.

 

Mike

post #4 of 7
What type of smoker are you looking to build?
post #5 of 7
Thread Starter 
A reverse flow smoker possibly with a warming section.
post #6 of 7

texas.gif  Good morning and welcome to the forum, from another sunny and hot day here in East Texas, and the best site on the web. Lots of great people with tons of information on just about  everything.

 

 

 

Gary

post #7 of 7
I am sure if you need any questions answered this is the place to ask them. I just built a smoker out of a 500 gallon propane tank witch is about 10ft long. I didn't go reverse flow. I did more of a Franklin style. It works really well.
New Posts  All Forums:Forum Nav:
  Return Home
  Back to Forum: Roll Call
SmokingMeatForums.com › Forums › Announcements › Roll Call › Preparing for a reverse flow smoker build in Wisconsin.